Compact underwater acoustic beacon for marking boats, anchor lines, or dive sites. Operates with the Scout Receiver to provide direction and distance guidance up to 1,000 ft (305 m). Features a lightweight, injection-molded housing with O-ring seal, magnetic on/off activation, and runs on a standard 9V battery. Designed for quick deployment, simple operation, and minimal maintenance.

Ranging acoustic release with individual and broadcast release modes. Best used in deeper/high current waters, especially for offshore use.

Scout receiver, operating range up-to 1,000ft. Receives signals and is held by diver, smaller unit.

The DiveTracker Scout Accessory Kit (Rx/Tx) includes essential items for basic maintenance and upkeep of your DiveTracker Scout Receiver and Transmitter.

Kit Includes:
1. 1/4 oz Silicone Lubricant
2. Replacement O-Rings
3. Lanyard
4. Set Pins
5. O-Ring Removal Tool

The DiveTracker Sport Accessory Kit (Rx/Tx) includes essential items for basic maintenance and upkeep of your DiveTracker Sport Receiver or Transmitter.

Kit Includes:
1. 1/4 oz Silicone Lubricant
2. Replacement O-Rings
3. Lanyard
4. Set Pin
5. O-Ring Removal Tool

Broadcast acoustic release with ONLY broadcast release mode. Best used in shallower/low-medium current waters, especially for nearshore/inshore use.

Ranging acoustic release with individual and broadcast release modes. Best used in deeper/high current waters, especially for offshore use.

Ranging acoustic release with individual and broadcast release modes. Best used in deeper/high current waters, especially for offshore use.

The ARC-3 is an acoustic release transponder, designed with a serial port in replacement of Desert Star System's kinetic release mechanism for custom release mechanism designs. The ARC-3 Includes ranging capabilities, individual release mode. broadcast release mode and public QID for acoustic gear marking.

Scout set, transmitter and receiver, operational range up-to 1,000ft.

Easy and Effective Dive Navigation Receiver. Operating range up-to 4,000ft. Held by diver, larger unit.

Easy and Effective Dive Navigation Transmitter, 4000ft operating range, typically goes on anchor line.

Sport set, transmitter and receiver, operational range up-to 4,000ft.

Hydrophone for SonarPoint Recorders.
Specifications:
1. Differential pre-amplifier for 2.7V - 11V supply @ 2.4mA
2. Pre-amp programming: Gain 44 dB, HP cutoff -3dB @ 10 Hz, LP cutoff - 3dB @ 200 kHz.
3. MCIL4M/MCDLSF connector on 3m cable (pigtail).
4. Pin Assignment: 1: Supply - 2: Amplifier Out - 3: Amplifier Out + 4: Supply +

Complete starter system for pot trap fishing in low–medium currents and nearshore/inshore waters. Eliminates surface buoys by storing rope and floats on the seafloor, with acoustic release for on-demand retrieval.

Includes: (1) ARC-2 Broadcast Release (rechargeable, fusible link), (1) STM-4 Deck Box, (1) ARC Accessory Kit (tools + Nickel Chromium wire), (1) Thru-Hull Transducer (directional), (1) Over-the-Side Transducer (omni-directional), (1) 80-Fathom Release Bag (480 ft 3/8" polysteel rope, two 8" floats, 7.1 lbs buoyancy, build guidelines), (1) Ropeless Fisher App™ (Android), and (1) Getting Started Guide.

Quantity discounts available. Contact salesinfo@desertstar.com
for bulk pricing.

Quantity pricing discounts are available. Please email t.mckinney@desertstar.com for an accurate quote if you plan to purchase multiple units.

The Ropeless Fisher Offshore™ Ranging release starter system includes:

(1) ARC-1XD - Ranging acoustic release with individual and broadcast release modes. Best used in deeper/high current waters, especially for offshore use. The ARC-1XD can provide status information without triggering a release and works with the public broadcast code system.
Service difficulty: Extremely easy.
Battery lifetime: 50 release cycles or one year, whichever comes first.
Release mechanism: Nickel chromium burn wire seated between two titanium burn posts with lever arm.
Expected lifetime: 10-15 years.
(1) STM-3 - Deck Box For Ranging Releases
Deck Box includes a tested integrated tablet/pc running DB-ARC Control Software.
(1) ARC Accessory Kit
ARC Accessory Kit includes 3/32" Allen wrench, 5/64" hex screwdriver, Xcelite wire cutter and spool of Nickel Chromium wire.
(2) ARC Cartridge Replacement System (Optional)
Acoustic Release Upgraded with a Titanium Release Cartridge plus a swap-out spare for each release. Designed for re-arming while working on a boat or vessel at sea.
(1) Thru-hull transducer - Directional transducer for mounting in the hull of the ship. Includes a hull mounting kit.
(1) Over-the-side transducer - Omni-directional transducer for testing and diagnosis.
(1) 80-Fathom Release Bag containing two 8" hard floats, 7.1 lbs buoyancy. 480ft of 3/8" diameter polysteel rope. Includes instructions a guidelines for building additional bags using materials that can be easily sourced from a local hardware store.
(1) Ropeless Fisher App™ - Virtual gear marking solution. Available for android smartphones and tablets.
(1) Comprehensive Getting Started Guide

A battery release section is recommended if the tagged animal rarely occupies the “energy harvesting zone” or there is a chance of bio fouling that may occur. Having a battery section prevents inefficient performance such as data loss due to high sampling rate in lieu of available light. Quantity order discount applied.

Deck Box includes over the side transducer, thru-hull transducer and mounting kit.. Also includes tested integrated tablet/pc running DB-ARC Control Software.

Includes:
1. Deck box
2. 100V-240V AC Power Adapter
3. 12V DC power cord with cigarette lighter plug
4. 12V DC power cord adapter for clipping directly to 12V boat battery.
5. Omni-directional over-the-side sonar transducer
6. Directional hull-mounted transducer